Bravada 2WD L6-4.2L VIN S (2002)
3. If installing the existing inflatable restraint steering wheel module coil, it must be centered first. Refer to Inflatable Restraint Coil Centering - Off
Vehicle (Column Shift And Floor Shift).
4. Align the inflatable restraint steering wheel module coil (2) with the horn tower sticking through the shaft lock or cam orientation plate (1).
5. Slide the inflatable restraint steering wheel module coil (2) onto the steering shaft assembly.
6. Remove and discard the centering tab from the new inflatable restraint steering wheel module coil.
IMPORTANT: The retaining ring (1) must seat securely on the groove of the race and upper shaft assembly (2).
7. Install the retaining ring (1) using snap ring pliers.
CAUTION: Refer to SIR Inflator Module Coil Caution in Service Precautions