Bravada 2WD L6-4.2L VIN S (2002)
Knee Diverter: Service and Repair
Trim Panel Replacement - Knee Bolster
REMOVAL PROCEDURE
1. Remove the left closeout/insulator panel.
2. Remove the 4 trim panel retaining screws.
3. Release the clips that retain the trim panel to the IP.
4. Remove the trim panel from the IP.
INSTALLATION PROCEDURE
1. Position the trim panel to the IP.
2. Seat the clips that retain the trim panel to the IP.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the 4 trim panel retaining screws.
Tighten
Tighten the screws to 2.5 N.m (22 lb in).
4. Install the left closeout/insulator panel.