Bravada 2WD L6-4.2L VIN S (2002)
8. Connect the steering wheel module yellow 2-way connector (2) located at the base of the steering column.
9. Install the CPA (1) to the steering wheel module yellow 2-way connector (2) located at the base of the steering column.
10. Install the AIR BAG Fuse to the fuse block.
11. Staying well away from all air bags, turn ON the ignition, with the engine OFF.
11.1. The AIR BAG indicator will flash 7 times.
11.2. The AIR BAG indicator will then turn OFF.
12. Perform the Diagnostic System Check - Restraint Systems if the AIR BAG indicator does not operate as described.
