Bravada 2WD L6-4.2L VIN S (2002)
1. Position the rear seat belt retractor assembly to the vehicle.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the bolts which retain the rear seat belt retractor assembly to the body.
Tighten
Tighten the rear seat belt retractor bolts to 70 N.m (52 lb ft).
3. Install the left rear quarter trim panel.
4. Install the rear seat belt floor anchor bolt. Ensure that the seat belt webbing is not twisted.
Tighten
Tighten the rear seat belt floor anchor bolt to 70 N.m (52 lb ft).
5. Install the lower seat belt anchor bolt cover.
6. install the rear seat belt upper guide with the bolt. Ensure that the seat belt webbing is not twisted.
Tighten
Tighten the rear seat belt upper guide bolt to 70 N.m (52 lb ft).
