Bravada 2WD L6-4.2L VIN S (2002)
2. Install the center seat belt anchor bolt that retains the center seat belt anchor to the seat belt buckle/anchor plate assembly. Tighten the bolt finger
tight.
3. Position the seat belt buckle/anchor plate assembly to the rear seat back hinge bracket.
4. Install the left rear seat back rear mounting nut that retains the left seat back to the floor panel.
Tighten
^
Tighten the rear seat back rear mounting nut to 45 N.m (33 lb ft).
^
Tighten the center seat belt anchor bolt to 50 N.m (37 lb ft).
5. Return the rear seats to the passenger position.
Trailblazer EXT, Envoy XL
REMOVAL PROCEDURE
1. Remove the 3 screws securing the inboard rear seat back hinge cover.
2. Remove the seat belt side buckle nut (2).
3. Remove the seat belt side buckle (1) from the seat.
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.
