Bravada 2WD L6-4.2L VIN S (2002)
1. Install the SDM to the vehicle.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the nuts that retain the SDM to the floor panel.
Tighten
Tighten the nuts to 12 N.m (106 lb in).
3. Connect the electrical connectors (2) to the SDM (1).
4. Return the carpet to the fully installed position.
5. Install the console mounting bracket to the floor panel.
6. Install the floor console.
7. Enable the SIR system. Refer to Air Bag(s) Arming and Disarming.
