Bravada 2WD L6-4.2L VIN S (2002)
4. Loosen the lower control arm adjustment bolts (1).
Notice: Refer to Fastener Notice in Service Precautions.
5. Adjust the caster and the camber angle by repositioning the lower control arm (2) until the specifications have been met.
When the adjustments are complete, hold the lower control arm in position so that the specifications do not change while tightening the lower
control arm adjustment bolts.
Tighten the lower control arm adjustment bolts to 160 Nm (118 ft. lbs.).
6. Verify that the caster and the camber are still within specifications.
When the caster and camber are within specifications, adjust the toe.
Front Wheel Toe Adjustment
Front Toe Adjustment
1. Loosen the jam nut on the outer tie rod (2).
Notice: Care must be taken that the boots are not: twisted when rotating the inner tie rods, or damage to the boots may result.
2. Rotate the inner tie rod (1) to the required toe specification setting.
Notice: Refer to Fastener Notice in Service Precautions.
3. Tighten the jam nut on the outer tie rod.
Tighten the outer tie rod jam nut to 75 Nm (55 ft. lbs.).
4. Check the toe setting after tightening.
5. Re-adjust the toe setting if necessary.
