Bravada 2WD L6-4.2L VIN S (2002)
11. Remove lower ball joint retaining nut.
12. Disconnect lower ball joint from steering knuckle using J43631.
Important: Take care not to disengage the axle shaft from the transmission (4WD Only).
13. Pivot the the lower control arm outward and downward in order to disconnect the lower control arm from the lower control arm bracket.
14. Remove the lower control arm from the steering knuckle.
Installation Procedure
1. Install the lower control arm to the steering knuckle.
Important: Take care not to disengage the axle shaft from the transmission.
2. Pivot the the lower control arm outward and upward in order to connect the lower control arm to the lower control arm bracket.
3. Install the lower control arm to the lower control arm bracket.
