Bravada 2WD L6-4.2L VIN S (2002)
7. Install the new retaining ring (E-clip) into the remaining quick connect fittings.
Notice: Ensure that the cooler line being installed has a plastic cap on each end that connects to a quick connect fitting. If no plastic cap exists, or the
plastic cap is damaged, obtain a new plastic cap and position on to the cooler line prior to the cooler line installation.
8. Connect the rear cooler lines (2) to the front cooler lines (1).
9. Install the cooler lines into the quick connect fitting.
10. Insert the cooler line end into the quick connect fitting until a click is either heard or felt.
11. Do not use the plastic cap on the cooler line in order to install the cooler line into the fitting.
12. Pull back sharply on the cooler line in order to ensure that the cooler line is fastened into the quick connect fitting.
