Bravada 2WD V8-5.3L VIN P (2004)
Trunk / Liftgate Striker: Service and Repair
Lock Striker Replacement - Liftgate
Lock Striker Replacement - Liftgate
Removal Procedure
1. Open the liftgate.
2. Using a grease pencil, mark the position of the liftgate striker to the body.
3. Remove the bolts that retain the liftgate striker to the body.
4. Remove the striker from the body.
Installation Procedure
1. Install the striker to the body and position as previously marked.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the bolts that retain the striker to the body.
Tighten the bolts to 25 N.m (18 lb ft).
3. Adjust the striker, if necessary.
4. Close the liftgate.