Bravada 2WD V8-5.3L VIN P (2004)
1. If necessary, install the traction control switch and wiring harness to the bezel.
2. Position the trim plate to the console.
3. Install the bezel to the console ensuring the retaining clips are fully seated.
4. Install the floor shift control boot to the floor console.
5. Install the console storage bin.
6. Position the shift lever in the PARK position.
7. Remove the wheels blocks from the vehicle.
Console Storage Bin Replacement
Console Storage Bin Replacement
Removal Procedure
1. Open the storage bin cover.
2. Remove the rubber mats covering the retaining screws
3. Remove the 6 screws that retain the storage bin to the console.
4. Remove the storage bin from the console.
Installation Procedure
1. Install the storage bin to the console.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the 6 screws that retain the storage bin to the console.
