Bravada 2WD V8-5.3L VIN P (2004)
2. Install a retainer nut (2) on each end of the seat latch rod (1).
3. Install the seat riser latch assembly (1) to the seat latch rod (2).
4. Install the rear seat cushion assembly (1) to the seat latch rod (3) with two bolts (2).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the rear seat cushion bolts to 11 N.m (97 lb in).
5. Install the seat in the vehicle.