Bravada 2WD V8-5.3L VIN P (2004)
11. Remove the brake hose retaining bolts from the frame.
12. Disconnect the sway bar link pins from the lower control arm on both sides.
13. Place an adjustable jack stand under the lower control arm.
14. Remove the upper ball joint pinch bolt and nut.
15. Disconnect the upper control arm from the upper ball joint.
16. lower and remove the adjustable jack stand allowing the suspension to hang.
17. Remove the left wheel driveshaft.
18. Remove the right wheel driveshaft from the intermediate shaft bearing assembly only. It is not necessary to remove the drive shaft from the
steering knuckle. Position the drive shaft to the side out of the way.