Bravada 2WD V8-5.3L VIN P (2004)
Important: All gaskets surfaces are to be free of oil or other foreign material during assembly.
1. Install the water pump and NEW gaskets.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the water pump bolts.
^
Tighten
On the initial pass, tighten the bolts to 15 Nm (11 ft. lbs.).
On the final pass, tighten the bolts to 30 Nm (22 ft. lbs.).
3. Install the auxiliary heater inlet and outlet hose/pipe nut.
^
Tighten the nut to 10 Nm (89 inch lbs.).
4. Install the hose to the throttle body.
5. Using J 38185, position the throttle body hose clamp at the throttle body.
6. Install the inlet and outlet hoses/pipes to the water pump.
7. Using J 38185, position the auxiliary heater inlet and outlet hose/pipe clamps at the water pump.
