Bravada 2WD V8-5.3L VIN P (2004)
Knee Diverter: Service and Repair
Knee Bolster Replacement
KNEE BOLSTER REPLACEMENT
REMOVAL PROCEDURE
1. Remove the left closeout/insulator panel.
2. Remove the knee bolster trim panel.
3. Remove the 4 knee bolster retaining nuts.
4. Remove the knee bolster from the steering column support bracket.
INSTALLATION PROCEDURE
1. Install the knee bolster to the steering column support bracket.
2. Install the 4 knee bolster retaining nuts.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the nuts to 10 N.m (88 lb in).
3. Install the knee bolster trim panel.
4. Install the left closeout/insulator panel.