Bravada 4WD V8-5.3L VIN P (2004)
Front Door Striker: Service and Repair
Striker Replacement - Door
Removal Procedure
1. Open the door.
2. Mark the position of the striker on the door frame.
3. Remove the 2 bolts that retain the striker to the door frame.
4. Remove the striker and spacer from the door frame.
Installation Procedure
1. Install the striker and spacer to the door frame.
Important: Do not tighten the bolts at this time.
2. Install the bolts that retain the striker to the door frame.
3. Position the striker and spacer to the door frame as previously marked.
Notice: Refer to Fastener Notice in Service Precautions.
4. Fully tighten the bolts that retain the striker to the door frame.
Tighten the bolts to 25 N.m (18 lb ft).
5. Close the door.
