Bravada 4WD V8-5.3L VIN P (2004)
Important: In any area with excessive damage, space the plug weld holes every 40 mm (1-1/2 in) apart.
1. Drill 8 mm (5/16 in) plug weld holes in the service part as necessary in the locations noted from the original panel.
2. Prepare all of the mating surfaces as necessary.
3. Apply 3M Weld-Thru Coating P/N 05916 or equivalent to all mating surfaces.
4. Position the hinge bracket.
5. Plug weld accordingly.
6. Clean and prepare all of the welded surfaces.
7. Apply the following as necessary:
*
The sound deadening materials
*
An approved anti-corrosion primer
*
The sealers and refinish as necessary
