oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Bracket Replacement - Console Floor|Page 10319 > < Bracket Replacement - Console Floor|Page 10317
Page 3
background image

Console Replacement - Overhead (TrailBlazer, Envoy, Bravada)

Removal Procedure

1. Remove the 2 screws that retain the console to the roof panel.
2. Release the front retaining tabs.
3. Lower the console and disconnect the electrical connectors as needed.
4. Remove the console from the vehicle
5. If replacing the console, remove the garage door opener if equipped.
6. If replacing the console, remove the OnStar (R) microphone if equipped.
7. If replacing the console, remove the personal message player/recorder if equipped.
8. If replacing the console, remove the power sunroof switch if equipped.
9. If replacing the console, remove the noise cancellation microphone if equipped.

Installation Procedure

1. If replacing the console, install the noise cancellation microphone if equipped.
2. If replacing the console, install the power sunroof switch if equipped.
3. If replacing the console, install the personal message player/recorder if equipped.
4. If replacing the console, install the OnStar (R) microphone if equipped.
5. If replacing the console, install the garage door opener if equipped.

6. Position the console to the roof panel.
7. Connect the electrical connectors as needed.
8. Seat the front retaining tabs.

Notice:  Refer to Fastener Notice in Service Precautions.

9. Install the 2 screws retaining the console to the roof panel.

Tighten the screws to 1.2 N.m (10 lb in).

Console Shift Lever Bezel Replacement

Console Shift Lever Bezel Replacement (Oldsmobile, Buick)

Removal Procedure

1. Block the wheels to prevent the vehicle from moving.
2. Remove the floor shift control boot from the floor console.
3. Adjust the shift lever fully rearward.
4. Remove the console storage bin.

Bracket Replacement - Console Floor|Page 10319 > < Bracket Replacement - Console Floor|Page 10317