Bravada 4WD V8-5.3L VIN P (2004)
Tighten the nut to 2 N.m (18 lb in).
7. Install the inflator switch to the inflator bezel.
8. Position the seat belt over the top of the trim panel, ensuring that the buckle is not behind the trim panel.
9. Align the locating tabs on the trim panel to the holes in the body.
10. Seat the clips that retain the trim panel to the body.
11. Install the seat belt lower anchor.
Tighten the anchor bolt to 70.0 N.m (52 lb ft).
12. Install the right rear door sill panel.
13. Install the lift gate sill plate.
14. Install the trim panel-rear quarter upper.
Trim Panel Replacement - Rear Quarter - Right (TrailBlazer, Envoy, Bravada)
Trim Panel Replacement - Rear Quarter - Right (TrailBlazer, Envoy, Bravada)
Removal Procedure
1. Remove the cargo shade/cover.
2. Remove the inflator access panel.
3. Remove the right rear quarter upper trim panel.
4. Remove the lift gate sill plate.
5. Remove the right rear door sill panel.
6. Remove the lower seat belt anchor bolt.
7. Release the retaining clips that retain the trim panel to the body.
8. Partially remove the trim panel in order to remove the inflator switch from the inflator bezel.
9. Remove the auxiliary air outlet washer and retaining nut.
10. Feed the auxiliary air outlet through the inflator bezel.
