Bravada 4WD V8-5.3L VIN P (2004)
1. Install the wiring harness clips (2) to the seat back frame.
2. Install the lumbar wiring harness (3) to the seat back frame.
3. Install the SIR wiring harness (1) to the seat back frame.
4. Install the side impact module tub to the seat back frame with 2 push pins (1).
5. Install the inflatable side impact module to the seat back frame with 2 screws (1).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the side impact module screws to 9 N.m (80 lb in).
6. Install the seat belt and retractor assembly.
7. Install the lumbar assembly.
8. Install the front seat back panel.
9. Install the seat back cover and pad.
10. Install the front seat back.
11. Install the seat trim panel.
12. Install the seat assembly to the vehicle.
