Bravada 4WD V8-5.3L VIN P (2004)
3. Remove the strap (1) from the rear seat cushion latch (2).
4. Remove the 3 bolts securing the rear seat cushion latch to the seat pan.
INSTALLATION PROCEDURE
1. Install the 3 bolts securing the rear seat cushion latch to the seat pan.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the rear seat cushion latch release bolts to 10 N.m (88 lb in).
2. Install the small loop (1) onto the rear seat cushion latch (2).
3. Install the strap through the opening in the seat pan.
4. Install the rear-seat cushion cover and the pad.