Bravada 4WD V8-5.3L VIN P (2004)
8. Install the outlet hose to the water pump.
9. Using J 38185, position the outlet hose clamp at the water pump.
10. Install the inlet hose to the water pump.
11. Using J 38185, position the inlet hose clamp at the water pump.
12. Install the cooing fan and shroud.
13. Install the accessory drive belt tensioner.
14. Install the air cleaner outlet duct and bolt.
^
Tighten the bolt to 10 Nm (89 inch lbs.).
15. Tighten the air cleaner outlet duct clamps at the following locations:
^
Throttle body
^
MAP/IAT sensor
^
Tighten the clamps to 7 Nm (62 inch lbs.).
