Bravada 4WD V8-5.3L VIN P (2004)
NOTICE:
Refer to Fastener Notice in Service Precautions.
6. Install the 2 lower bellhousing bolts.
6.1.
Tighten the lower bellhousing bolts to 50 Nm (37 ft. lbs.).
6.2.
Tighten the 2 rear oil pan to rear cover bolts to 12 Nm (106 inch lbs.).
6.3.
Tighten the remaining oil pan bolts to 25 Nm (18 ft. lbs.).
7. Release the differential from the frame and install to the oil pan.
8. Install the differential bolts.
Tighten the bolts to 85 Nm (63 ft. lbs.).
9. Install the 2 lower A/C compressor bracket bolts.
10. Tighten the 2 upper A/C compressor bracket bolts.
Tighten the bolts to 50 Nm (37 ft. lbs.).
11. Install the battery cable channel to the oil pan.
12. Install the battery cable channel bolt to the oil pan.
Tighten the bolt to 12 Nm (106 inch lbs.).
13. Install the Flywheel inspection cover to the left side of the transmission.
14. Install the starter.
