Bravada 4WD V8-5.3L VIN P (2004)
4. Release the retaining tab on the side of the throttle actuator control (TAC) module (3).
5. Remove the TAC module (3) from the retaining bracket (1).
6. If necessary, remove the TAC module bracket nuts (2) and bracket (1).
INSTALLATION PROCEDURE
NOTE:
-
Refer to Handling ESD Sensitive Parts Notice in Service Precautions.
-
Refer to Fastener Notice in Service Precautions.
1. If necessary, install the TAC module bracket (1) and nuts (2).
Tighten
Tighten the nuts to 9 N.m (80 lb in).
2. Install the TAC module (3) to the retaining bracket (1).
3. Snap the TAC module (3) into retaining tab.