Bravada 4WD V8-5.3L VIN P (2004)
3. Install the rear quarter lower trim, left or right side.
4. Install the rear seat belt floor anchor bolt. Ensure that the seat belt webbing is not twisted.
Tighten
Tighten the rear seat belt floor anchor bolt to 70 N.m (52 lb ft).
5. Install the anchor bolt cover.
6. Install the rear quarter upper trim, left or right side.
7. Install the rear seat belt upper guide with the bolt. Ensure that the seat belt webbing is not twisted.
Tighten
Tighten the rear seat belt upper guide bolt to 70 N.m (52 lb ft).
