Bravada 4WD V8-5.3L VIN P (2004)
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the block base retaining nuts to 10 N.m (88 lb in).
3. Connect the console harness connector to the block base.
4. Connect the headliner harness connector (2) to the block base.
5. Connect the body wiring harness connector (1) to the block base.
6. Connect the mobile telephone harness connector (1) to the junction block.
7. Connect the instrument panel harness connector (1) to the block base.
8. Install the junction block to the block base.Ensure that the retaining tabs are fully seated.
