Bravada 4WD V8-5.3L VIN P (2004)
10. Remove the starter lead nut (2).
11. Remove the positive cable (1) from the starter stud.
12. Remove the starter.
INSTALLATION PROCEDURE
1. Install the starter.
2. Position the starter down, with the terminals facing towards the front of the vehicle.
3. Install the positive cable (1) to the starter stud.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the starter lead nut (2).
Tighten
Tighten the nut to 9 N.m (80 lb in).
5. Install the starter solenoid lead (1) to the solenoid stud.
6. Install the starter solenoid nut (2).
Tighten
Tighten the nut to 3.4 N.m (30 lb in).