Bravada 4WD V8-5.3L VIN P (2004)
2. Turn the spring compressor forcing screw (1) until the coil spring is compressed.
3. Install the shock absorber to the shock module.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the shock absorber retaining nut.
Tighten the shock absorber retaining nut to 45 Nm (33 ft. lbs.).
5. Remove the shock module (2) from the J45400 (1)
6. Remove the pieces of heater hose from the shock module spring.
