Bravada 4WD V8-5.3L VIN P (2004)
^
The LH and RH springs are not necessarily the same part numbers.
^
Each vehicle may have a different build combination.
^
Use the RPO label located in the glove box to determine what part number springs to replace.
^
Only small quantity of parts are available. Please DO NOT order for stock only.
1.
Select the correct new rear coil spring part numbers. Refer to the Parts Information below.
2.
Install the upper bushing seats on the new rear coil springs and install the springs into the vehicle.
3.
Raise the rear axle with the adjustable jack stand.
4.
Install the two shock absorber lower mounting bolts.
Tighten
Tighten the two shock absorber lower mounting bolts to 80 N.m (59 lb-ft).
5.
Remove both of the adjustable jack stands from under the vehicle.
6.
Lower the vehicle.
Parts Information
Warranty Information
