Bravada 4WD V8-5.3L VIN P (2004)
7. Place an alignment mark between the pinion and the pinion yoke.
8. Install the J 8614-01 as shown.
9. Remove the pinion nut while holding the J 8614-01.
10. Remove the washer.
11. Install the J 8614-3 (2) and the J 8614-2 (3) into the J 8614-01 (1) as shown.
12. Remove the pinion yoke by turning the J 8614-3 (3) clockwise while holding the J8614-01 (1).
Use a container in order to retrieve the lubricant.
13. Remove the pinion oil seal. Use a suitable seal removal tool. Do not damage the housing.
Installation Procedure