Bravada 4WD V8-5.3L VIN P (2004)
18. Place the large retaining clamp (2) on the boot.
19. Place the housing (1) and the new trilobal tripot bushing over the spider assembly (3).
20. Install the boot onto the trilobal tripot bushing.
21. Inspect the inboard stroke position (see diagram).
^
For male tripot housing assembly: dimension a = 280 mm (11 inch).
^
For female tripot housing assembly: dimension b = 228 mm (9 inch).
22. Secure the large retaining clamp (2) and the boot (3) to the housing (1) using J 35566.
23. Remove the convolute retainer from the boot (1).
