Bravada 4WD V8-5.3L VIN P (2004)
9. Spread the spacer rings (1, 3) using J 8059, or equivalent, to remove the spider assembly (2).
10. Remove the following items:
^
The spacer ring (1)
^
The spider assembly (2)
^
The second spacer ring (3)
^
The tripot boot (4)
11. Discard the tripot boot and spacer rings.
12. Clean the halfshaft bar. Use a wire brush to remove any rust in the boot mounting area grooves.
13. Inspect the following items:
^
The needle rollers
^
The needle bearings
^
The trunnion
14. Inspect the tripot housing for unusual wear, cracks, or other damage.
15. Use the appropriate kit to replace any damaged parts.
Assembly Procedure
1. Position the new swage clamp onto the neck of the boot. Do not swage.
