Bravada 4WD V8-5.3L VIN P (2004)
Fluid - Transfer Case: Service and Repair
NVG 126-NP4
Transfer Case Fluid Replacement
Removal Procedure
1. Raise the vehicle.
2. Remove the fill plug.
3. Remove the drain plug.
Important: Ensure that an approved drain pan is used when draining the transfer case.
4. Allow the transfer case to drain completely.
Installation Procedure
1. Apply pipe sealant GM P/N 12346004 (Canadian P/N 10953480) or equivalent to the drain plug threads.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the drain plug.
^
Tighten the drain plug to 27 Nm (20 ft. lbs.).
3. Fill the transfer case with the proper fluid.