Bravada 4WD V8-5.3L VIN P (2004)
2. Align the front output shaft seal on the J 45236-2 (1).
3. Using the J 45236-1 (2), install the front output shaft seal.
4. Remove the J 45236-1 and the J 45236-2.
5. Install the dust shield on the front output shaft.
6. Install the front propeller shaft.
7. Inspect the transfer case fluid level.
8. Lower the vehicle.
Rear
Transfer Case Output Shaft Seal Replacement- Rear
^
Tools Required
-
J37668-A Output Shaft Seal Installer (4401 & 4470 Transfer Case)
-
J 45380 Transfer Case Rear Bushing Remover and Installer
Removal Procedure