Bravada 4WD V8-5.3L VIN P (2004)
Windshield Washer Pump: Service and Repair
Washer Pump Replacement - Rear
WASHER PUMP REPLACEMENT - REAR
REMOVAL PROCEDURE
1. Remove the washer solvent container.
2. Disconnect the washer hose (4) from the pump (5).
3. Remove the pump (5) from the solvent container by carefully pulling pump from the retainer (1).
4. Remove the pump from the sealing grommet (3) by pulling the pump upwards.
INSTALLATION PROCEDURE
1. Install the pump (5) to the sealing grommet (3).
2. Install the pump (5) to the retainer (1) on the solvent container.
3. Connect the washer hose (4) to the pump (5).
4. Install the washer solvent container.