Calais L4-138 2.3L VIN D FI (1990)
Brake Master Cylinder: Service and Repair
Master Cylinder Installation
For additional informations see Notes, Warnings, and Hints. See: Fundamentals and Basics
Removing/Installing Master Cylinder Assembly
-
Install master cylinder with attaching nuts and torque to 27 Nm (20 lbs. ft.).
-
Install brake pipes and torque to 20 Nm (15 lbs. ft.).
Fluid Level Sensor Switch
-
Install electrical connector to fluid level sensor switch.
-
Fill master cylinder to proper level with clean brake fluid. Proper level is between min. and max. indicator levels in opening on top reservoir.
-
Bleed hydraulic system. See: Service and Repair
-
Recheck fluid level.