oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

91T023T40 > < A/T - Light Throttle Pedal Buzz
Page 1
background image

Accumulator: Customer Interest
A/T - Pedal Buzz At Idle or Light Throttle

NUMBER:

91-T-02A

CORP.REF.NO: 077126R

DATE:

March 1991

SECTION:

7A, 3T40

SUBJECT:

PEDAL BUZZ AT IDLE OR LIGHT THROTTLE IN FORWARD GEAR RANGES - NEW SPACER PLATE

MODELS/YEARS:

1990-91 CUTLASS CALAIS AND CUTLASS SUPREME

EQUIPPED WITH QUAD 4 ENGINE AND HYDRA-MATIC 3T40 (RPO-MD9) TRANSAXLE

This bulletin cancels and supercedes Dealer Technical Bulletin 91-T-02.

This bulletin covers a new spacer plate with a smaller 1-2 accumulator orifice which will reduce the potential for pedal buzz. This pedal buzz is
noticeable at zero to light throttle in forward gear ranges caused by unstable operation of the 1-2 accumulator valve.

DATE OF PRODUCTION CHANGE:
This new spacer plate went into production in all "K" and "L" model HYDRA-MATIC 3T40 transaxles for the 1991 model year on July 30, 1990 (Julian
Date 211).
NOTE:

1991 KKC model transaxles with serial numbers built between 1011 - 1830 and built after July 30, 1990 (Julian Date 211) are also
affected.

SERVICE PROCEDURE:
To service any HYDRA-MATIC 3T40 for a pedal buzz condition, replace the (existing) spacer plate with a new spacer plate which contains the smaller
1-2 accumulator orifice.

SERVICE PARTS INFORMATION:
Refer to the following part numbers whenever ordering this new spacer plate.

Part Number and Transaxle Model 
8678035 - KDC 
8678489 - KKC 
8678488 - KNC 
8678038 - KXC (1991 Only) 
8678163 - LJC 
8678164 - LKC 
8678164 - LLC

Parts are currently available from GMSPO.

SERVICE MANUAL REFERENCE:
Whenever service to the Spacer Plate or valve body assembly is necessary, refer to the HYDRA-MATIC 3T40 Unit Repair Section of your service
manual.

91T023T40 > < A/T - Light Throttle Pedal Buzz