oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

A/T - New Roller Clutch|Page 3494 > < Direct Clutch Housing - Revised|Page 3488
Page 1
background image

Clutch: All Technical Service Bulletins
A/T - New Roller Clutch

NUMBER:

91-T-58

CORP.REF.NO:  177103

DATE:

February 1991

SECTION:

7A, 3T40

SUBJECT:

NEW (NEW DEPARTURE HYATT) ROLLER CLUTCH

MODELS/YEARS: ALL 1991 AND PRIOR MODEL YEAR OLDSMOBILES

EQUIPPED WITH HYDRA-MATIC 3T40 TRANSAXLES (RPO - MD9)

Figure 1

Figure 2

Hydra-Matic has released a new NDH (New Departure Hyatt) Roller Clutch (662) for all HYDRAMATIC 3T40 transaxles, for increased Lo Roller
clutch durability. This roller clutch has a new spring and roller holding cage which is plastic and black in color. The springs located inside the roller
clutch have been rotated to a position of 90 degrees. See Figures 1 and 2.

DATE OF PRODUCTION CHANGE:

This new roller clutch went into production October 23, 1990 (Julian Date 296) for all Willow Run built models. Windsor built models will be equipped
with this new roller clutch at a future date.

SERVICE PARTS INFORMATION:

This new roller clutch may be used in all prior model year HYDRA-MATIC 3T40 transaxles. Whenever ordering this new NDH roller clutch, refer to
the following part number:

A/T - New Roller Clutch|Page 3494 > < Direct Clutch Housing - Revised|Page 3488