Calais L4-151 2.5L VIN U TBI (1989)
Radio/Stereo: Service and Repair
Models w/Auto Calculator
1.
Disconnect battery ground cable.
2.
Remove radio trim plate attaching screws, then the trim plate.
3.
Remove radio mounting bracket attaching screws, then disconnect antenna lead and electrical connector(s) from radio.
4.
Remove radio.
5.
Reverse procedure to install.
Fig. 32 Radio Installation. Cutlass Calais
Models Less Auto Calculator
1.
Disconnect battery ground cable, then open ashtray and remove insert.
2.
Depress tab on each ashtray locking tang, pull ashtray out to second stop, depress tabs again and remove ashtray. There is a locking tang on each
side of ashtray and each tang has a tab on the right side, Fig. 32.
3.
Remove 2 screws securing upper ashtray bracket and the bracket and trim plate assembly.
4.
Remove radio mounting screws and withdraw radio.
5.
Disconnect antenna lead and electrical connectors, then remove radio.
6.
Reverse procedure to install.