Calais L4-151 2.5L VIN U TBI (1989)
Front Bumper Cover / Fascia: All Technical Service Bulletins
Body - Front Fascia Sag Below Headlamps
SUBJECT:
FRONT FASCIA SAG BELOW HEADLAMPS (INSTALL SHIM UNDER FASCIA BELOW EACH HEADLIGHT)
MODELS/YEARS:
1989 CUTLASS CALAIS
NUMBER:
89-T-98
CORP. REF. NO: 972001
DATE:
July 1989
SECTION:
2C
Figure 1
Some 1989 Calais models may develop a sag or hollow appearance in the fascia below the headlamps. If this condition should develop and cause
customer comments on it, it may be corrected by installing a shim under the fascia below each headlamp.
The following procedure is to be used for installation of the fascia shims:
Procedure:
1.
Refer to the 1989 Cutlass Calais Service Manual 2C-5, Figure 7 and remove items 4 and 5 (grille and filler).
2.
Remove the headlamp assemblies.
3.
Remove the bolts/screws attaching the upper edge of the front fascia to the impact bar.
4.
Lift the upper edge of the fascia and insert the shims as shown in Figure 1, using part number 22548960 RH and 22548961 LH. Parts are currently
available through GMSPO.
5.
Reinstall the parts removed above.
WARRANTY INFORMATION:
Labor Operation Number:
T4653
Labor Time:
0.5 hr.
Trouble Code:
92