Calais L4-151 2.5L VIN U TBI (1989)
Procedure:
Refer to Figure
1.
Remove the door trim panel and the mirror filler panel.
2.
Disconnect the remote cable.
3.
Remove the proper foam gasket from the backing paper and install it (sticky side towards door) with the three nuts on the studs in the holes and the
remote cable routed through the slit.
4.
Pull the glass channel down out of the door window frame at the front and partially out of the vertical channel.
5.
Install the 150 mm x 20 mm tape as shown in Section A-A of the figure.