oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Passenger Seat - Will Not Lock Into Position|Page 5925 > < Passenger Seat - Will Not Lock Into Position|Page 5919
Page 1
background image

Seat Track: Customer Interest
Passenger Seat - Will Not Lock Into Position

NUMBER:

91-T-150

CORP.REF.NO:  131025

DATE:

June 1991

SECTION:

10-10

SUBJECT:
PASSENGER SEAT WILL NOT LOCK INTO POSITION REPLACE SEAT OUTER LATCH RETURN SPRING

MODELS/YEARS:
1989-91 CUTLASS CALAIS COUPE MODELS

CONDITION: The standard passenger EZ Entry seat adjuster for 1989 through early 1991 Cutlass Calais coupe models may exhibit a no-lock condition

when repositioning the seat assembly forward or backward.

CAUSE:

The latch return spring on the outer track of the seat adjuster may break when adjusting the seat assembly forward or backward. Once the
spring is broken, the latch on the outer track cannot return to the lock position.

CORRECTION:

Replace passenger seat outer latch return spring as follows:

Remove or Disconnect:
1.

Seat adjuster trim covers.

2.

Seat adjuster to floor pan attaching nuts, then remove seat assembly from vehicle.

Passenger Seat - Will Not Lock Into Position|Page 5925 > < Passenger Seat - Will Not Lock Into Position|Page 5919