oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Malfunction Indicator Lamp|Testing and Inspection|Page 1037 > < Malfunction Indicator Lamp|Testing and Inspection
Page 2
background image

TEST DESCRIPTION:

Numbers below refer to circled numbers on the diagnostic chart.

1.

"SERVICE ENGINE SOON" light should be "ON."

2.

Using a test light connected to 12 volts, probe each of the system ground circuits to be sure a good ground is present.See ECM CONNECTOR
IDENTIFICATION
 in ELECTRICAL AND ELECTRONIC DIAGRAMS for ECM pin locations of ground circuits.

DIAGNOSTIC AIDS:

If the engine runs OK, check:

^

Faulty light bulb.

^

CKT 419 open.

^

Gauge fuse.

If the engine cranks but will not run, check:

^

Continuous battery fuse or fusible link open.

^

Ignition CKT 439 to ECM open.

^

Poor connection to ECM.

Malfunction Indicator Lamp|Testing and Inspection|Page 1037 > < Malfunction Indicator Lamp|Testing and Inspection