Calais V6-3300 3.3L MFI VIN N (1990)
Heated Glass Element Switch: Service and Repair
Fig. 20 Satellite Switch Removal. 1989-91 Skylark
Fig. 21 Satellite Switch Removal. 1989-91 Cutlass Calais
Fig. 22 Headlamp Defroster Switch Removal. 1989-91 Grand Am
Fig. 23 W/S Wiper/Washer Switch Removal. 1989-91 Grand Am
The headlamp, hazard flasher, rear defogger and windshield wiper/washer controls are incorporated into switch modules mounted on either side of the
instrument cluster.
1.
Disconnect battery ground cable.
2.
Remove steering column collar, if equipped, then the steering column filler plate screws and filler plate or lap duct assembly.
3.
Remove instrument cluster trim plate attaching screws, then the trim plate.
4.
On Skylark models, remove switch bezel retaining screws and the bezels.
5.
On all models, remove switch retaining screws, pull switch assembly away from instrument panel, Figs. 20 through 23, and disconnect electrical
connectors as needed to complete removal.
