Calais V6-3300 3.3L MFI VIN N (1990)
27 Style
NOTICE: When removing a door trim panel that has a power window switch attached, the ignition switch must be in the "off" position. This will
eliminate the possibility of shorting out the switch if a screwdriver or awl is used to remove the switch from the harness.
The 27 & 69 styles have an armrest which is applied to the trim panel before the trim panel has been installed to the door inner panel.
Remove or Disconnect
1. Trim panel (4).
2. Carefully peel back sound absorber (2) to reveal pal nuts (3).
3. Pal nuts (3).
4. Armrest pad (1).
Install or Connect
1. Armrest pad (1) to trim panel (4).
2. Pal nuts (3).
3. Sound absorber (2) to trim panel (4) with a suitable adhesive.
4. Trim panel (4).
27 Style
