Calais V6-3300 3.3L MFI VIN N (1990)
Spring clips are used to secure handle connecting rods and inside locking rods to door lock levers and handle levers A slot in the clip provides for
disengagement of the rod
Remove or Disconnect
1. Clip from lever by using a scratch awl, pick or other thin-bladed tool and sliding clip out of engagement.
2. Rod from clip by pulling rod out of clip.
Install or Connect
1. Clip to lever by pressing clip fully on lever.
2. Rod to lever by pressing rod through hole in lever until fully engaged by clip.
Striker
Interlock Assembly
CAUTION: The striker and plate make the door interlock with the roof rail in a crash. If someone were to remove them. the door
couldn't interlock with the roof rail in a crash and might spring open. People inside could be thrown out of the car much more easily with
the door open. Be sure you never remove the striker or the plate when you're doing repair work around them.
Remove or Disconnect
1. Scribe location of striker onto vehicle body.