Calais V6-3300 3.3L MFI VIN N (1990)
1. Ends of pull handle (1) by grasping and pulling inboard to disengage snaps (2).
2. Screws (4).
3. Pull handle (1).
Install or Connect
1. Pull handle (1) to trim panel.
2. Screws (4).
3. Fold ends of pull strap (1) over attaching screw (4) and slide into pull strap escutcheon (3) while at the same time snapping snaps (2) to secure.
Connecting Rods, Push Rods, Bell Cranks
Remove or Disconnect
1. Rods and push rods by disengaging spring clips.
2. Plastic clips by unsnapping portion engaged to connecting rod and then pulling rod out of attaching hole (clip remains in hole until rod is
removed).
3. Bellcranks (6) by punching out attaching rivet center pin and then drilling out rivet with 3/16" drill bit.
Install or Connect
1. Rod and push rods by engaging spring clips.
2. Plastic clips by snapping clip over rods to be connected.
3. Bellcranks (6) by using 3/16" diameter x 5/16" length steel rivets.
Door Lock Cylinder
