Calais FWD V6-181 3.0L (1986)
FIGURE 1
5.
Inspect the casting and fluid passages for foreign materials that may have accumulated in pockets. Remove the foreign material with a small
screwdriver or an awl. Fig. 1.
6.
As necessary, repeat the washing and drying procedures as described in steps 3 and 4 until all foreign materials are removed.
FIGURE 2
7.
While applying a slight pressure with your finger against spring force in the valve train, remove the coiled spring pin, sleeve or clip that retains the
valve train. Fig. 2.
FIGURE 3
8.
Slowly release pressure on the valve train and remove it from the valve body. A small flat blade screwdriver may be used to remove the bushing
from the bore. Fig. 3