Ciera V6-173 2.8L VIN W FI (1986)
9.
Start engine; then check "crank" fuse to assure correct wiring.
10.
Install Campaign Identification Label and close hood.
CAMPAIGN IDENTIFICATION LABEL INSTALLATION
Each vehicle modified in accordance with the instructions outlined in this procedure will require a Campaign Identification label. Each label provides a
space to include the campaign number, the
(5)
digit dealer code of the dealer performing the campaign service, and the date vehicle was campaigned. This information may be inserted with a
typewriter or ballpoint pen. When installing label, clean the surface of the radiator upper mounting support and apply the campaign label where it
is readily visible.
PARTS INFORMATION
Parts required to complete this modification are to be obtained from the Warehousing and Distribution Division of General Motors (WDDGM). To
ensure that these parts will be obtained as soon as possible, they should be ordered from WDDGM on a C.I.O. order with no special instruction code but
on an advise code (2).
Part Number
Description
Quantity
12004007
10 Amp Mini Fuse
1
CLAIM INFORMATION
Operation
Failure Code
Labor Operation
Labor Hours
Inspect - No Further Action
Required
96
V3430
.2
Inspect - Reverse Circuit Wires and
Replace Fuse
96
V3431
.2