oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Engine - Cold Start Stall, Cold Driveaway Hesitation|Page 3297 > < Engine - Cold Start Stall, Cold Driveaway Hesitation
Page 2
background image

To service this condition, which generally occurs at approximate temperatures of 50 - 70 degrees Fahrenheit complete the diagnostic procedures per
Section 6 of the Service Manual. Specific attention should be given to the following items and repair as required:

1.

Loose or leaking air duct between mass airflow (MAF) sensor and throttle body.

2.

Low base idle air rate.

3.

Openings in the EGR transfer tube.

If the condition persists, replace the PROM with one of the following service PROMS, which may be obtained from GMSPO. (See the following chart).

IMPORTANT:

The new service PROMS are for Cutlass Ciera models with a 2.8L port fuel injected engine and a 3-speed automatic transaxle.

Parts are currently available through GMSPO.

WARRANTY INFORMATION:

Labor Operation Number:

T1417

Labor Time:

.5 Hours

Trouble Code:

92

Engine - Cold Start Stall, Cold Driveaway Hesitation|Page 3297 > < Engine - Cold Start Stall, Cold Driveaway Hesitation